GENERAL

Dimensions (HxWxD)

7" x 10.4" x 8.25" (117.8 x 264 x 210 mm)

Operating temperature

5 – 40 ˚C

Operating humidity

8 – 90 %

Elevation

≤2000 m

Finish

Powder-coated aluminum

Environmental

IP65, Pollution Degree: 2

Mounting options

Integrated wall mount brackets

Vibration mounts

Included and required for operation

Weight

22.5 lbs (10.2 kg)

Approvals

CE, cNEMKOus

PNEUMATIC

Leak test system

Number of test channels

1

Valve life rating (cycles)

100,000,000 (low volume manifold), 10,000,000 (high flow manifold)

System leak

<0.02 SCCM at 10 psig

Fill rate (max)

20 SLPM (low volume manifold)

300 SLPM (high flow manifold)

Air supply preparation for supply and pilot

Standard

ISO 8573.1:2001 Class 1.4.2 or better

Pre-filter

≤5 μm

Air dryness

≤3 °C dew point

Oil concentration

≤0.1 mg/m3

Gas compatibility

Air, helium, nitrogen (consult factory for compatibility with other gases)

Supply pressure

Maximum

100 psig for positive pressure; 5-3 psi below desired test pressure for vacuum pressure

Minimum

5-20 psi above test pressure for positive pressure; 13.75 psiv (28" Hg) for vacuum pressure

Required flow capacity

1000 SLPM (35 SCFM) or higher at 100 psig

Stability

±0.1 psi

Pre-regulation

Precision input regulator with supply pressure effect <0.1 psi per 100 psi input pressure change is required (see optional accessories list).

Pilot pressure (high flow manifold only)

Minimum

30 psig or supply pressure, whichever is greater

Maximum

135 psig

Test pressure sensor

Range Selection

(see model chart)

Accuracy

±0.25 % of FS, best-fit straight line

Temperature error band

±1.0 % of FS from 4 °C to 60 °C

Noise

<10 ppm rms of FS (<0.001 % of FS) - 300 Hz bandwidth

<1 ppm rms of FS (<0.0001 % of FS) - 1 Hz bandwidth

Resolution

0.06 ppm of FS